Weco Single module, HV/LV, 48V, 5.3kWh, incl bracket and LV cables

Weco Single module 5.3kWh comes complete, with mounting bracket and LV cables.

Weco Single module 5.3kWh Specifications

Basic Parameters: 5K3

LV/HV Battery System Capacity: 5,3 kWh

Single Module Nominal Voltage: 52V

Application: Dual Voltage LV/HV

Modules: Expandibility HV-16 in series ( up to 9 cluster in parallel with HVBOX) LV- 10 in parallel Without WE-HUB 100 in parallel with WE-HUB

Cluster Net Capacity: 748 kWh (HV) / 520 kWh (LV)

Voltage Range: 48,5-1000

Net Capacity: 110

Usable Capacity:  100Ah

Dimension:  576*461*156mm

Weight: 52Kg

Charge / Discharge Curren:t 110

Step 01: 160 ( 60 sec)

Peak: 200 (Peak 5s)

Depth of Discharge: 100%

Communication Port: RS485, CAN, 232, Wi-Fi

Single string quantity(pcs): 16

Discharge Temperature*: -20 ~ 55°C

Charge Temperature /°c*: -10 ~ 55°C

Shelf Temperature/°c: -10 ~ 50°C

Humidity: 5%~95%

Altitude (m): 8000 , 25°c

Standards: IEC62619/UL1973 CE/UN38.3

Features: Pre-Charge+Fuse LV+ Fuse HV+ Auto Contactor + Dual BMS+ Multi BMS FW management

The Stackable Module is a DUAL VOLTAGE module that can be used in a Low Voltage(48.5-58.4Vdc) configuration or in a High Voltage(80/200-750Vdc) configuration.

Weco’s single module, 5.3kWh is the most advanced lithium module for home and industrial. The energy storage module offers both on-grid and off-grid energy storage. One product is suitable for two applications LV or HV. Fast connections. When installed the lithium battery can be wall or floor-mounted, stackable, serial or parallel all depending on your unique requirement. High capacity output is achieved thanks to expandable and simple configuration.

The WeCo 5.3kWh Battery Module has two terminals for connecting the power supply. The low voltage screw terminal only supports parallel connection with maximum voltage 60V.  Fast Connector terminals only support series connections up to 1000Vdc (always check the HV BOX max Voltage). Make sure to use the correct inverter charging parameters before connecting to the battery.

This Battery Module is designed to be used indoor with a a IP20 rating. In the event of multiple modules installed on the wall. Make sure to respect the distance of 25cm between each module. As well as 30cm below the ceiling line. The battery is always delivered in WALL mode and it is, therefore, necessary for the installer to make simple changes to install the STACK kit.

BMS power switch | Single CAN + DI/DO RJ 45 cable | BMS new generation pulse equalizer | Whole cluster FW upgrade via master(LV) | Whole cluster FW upgrade (HV Box + Battery) via HV Box | Calendar data logs accessible in CSV from BMS | WiFi & bluetooth built in HV Bos start up 80Vdc (2 modules)